Honda (American Honda Motor Co.) Recall List

List of the Honda (American Honda Motor Co.) recalls announced through NHTSA

Some of the listed recalls may apply to multiple models. All affected models can be found in the details of each recall below.

373 results found

Recent Recalls

13. 11. 1997

Honda (American Honda Motor Co.) – HONDA/FLOOR MATS

VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLES EQUIPPED WITH A DRIVER'S SIDE OPTIONAL EQUIPMENT RUBBER FLOOR MAT. REPEATED MOVEMENT OF THE DRIVER'S FEET AND ACTUATION OF THE ACCELERATOR PEDAL CAN RESULT IN…

1. 11. 1997

Honda (American Honda Motor Co.) – AUTOLIV/HONDA/AIR BAG MODULE

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT PASSENGER AIR BAG MODULES HAVE BEEN IMPROPERLY ASSEMBLED. THE CLOTH FLAPS COVERING THE FOLDED AIR BAG MAY HAVE BEEN TUCKED IN TOO FAR.

3. 6. 1997

Honda (American Honda Motor Co.) – HONDA/FRONT BRAKE LINES

THE LEFT FRONT BRAKE LINES WERE INSTALLED IMPROPERLY AT THE ASSEMBLY LINE RESULTING IN INSUFFICIENT CLEARANCE BETWEEN THE BRAKE LINE AND AN UPPER CONTROL ARM OF THE SUSPENSION.

11. 3. 1997

Honda (American Honda Motor Co.) – HONDA/ACURA/FRONT AXLE HUB

THESE VEHICLES WERE MANUFACTURED WITHOUT A LOCK WASHER AND/OR SCREWS IN THE FRONT HUB.

1. 1. 1997

Honda (American Honda Motor Co.) – HONDA/ALTERNATOR

AN INTEGRATED CIRCUIT WITHIN THE VOLTAGE REGULATOR CAN CONTAIN MANUFACTURING ERRORS.

12. 12. 1996

Honda (American Honda Motor Co.) – HONDA/SEAT BELT BUCKLE

CERTAIN VEHICLES WERE MANUFACTURED WITH AN INCORRECT REAR CENTER SEAT BELT ASSEMBLY BUCKLE. THE MISBUILD INVOLVED FITTING A BUCKLE FOR ANOTHER MARKET WITH THE CORRECT U.S. SPECIFICATION SEAT BELT.

28. 10. 1996

Honda (American Honda Motor Co.) – HONDA/REAR TURN SIGNAL

THE METAL STAY OR RUBBER SUPPORT FOR THE REAR TURN SIGNAL CAN FALL CAUSING THE REAR TURN SIGNAL LIGHT TO BE OUT-OF-POSITION.

4. 10. 1996

Honda (American Honda Motor Co.) – HONDA/AIR BAGS

THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) ELECTRONIC CONTROL UNIT CAN CAUSE THE AIR BAG TO DEPLOY UNEXPECTEDLY.

17. 9. 1996

Honda (American Honda Motor Co.) – HONDA/TAKATA SEAT BELTS

THE LATCH PLATE USED IN THE SEAT BELT BUCKLE WAS NOT MANUFACTURED ACCORDING TO DESIGN DIMENSIONS. IF THE SEAT BELT TONGUE IS INSERTED SLOWLY AT AN ANGLE INTO THE BUCKLE,…

18. 6. 1996

Honda (American Honda Motor Co.) – HONDA/BRAKES:HYDRAULIC:POWER ASSIST:CHECK VALVE

A SOAPY LUBRICANT WAS USED TO INSERT THE CHECK VALVE INTO THE VACUUM HOSE WHICH CAUSES THE BRAKE BOOSTER CHECK VALVE TO STICK.