ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
ON CERTAIN PASSENGER VEHICLES, THE INTERLOCK OPERATION OF THE IGNITION SWITCH MAY NOT FUNCTION PROPERLY, MAKING IT POSSIBLE TO TURN THE IGNITION KEY TO THE "OFF" POSITION AND REMOVE THE…
CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY…
ON CERTAIN MOTORCYCLES, THE MAIN WIRE HARNESS HAS A GROUND DISTRIBUTION CONNECTOR THAT IS INCORRECTLY ASSEMBLED. SOME ELECTRICAL CIRCUITS MAY OVERHEAT AND SHORT, INCLUDING THE FUEL PUMP.
ON CERTAIN MOTORCYCLES, THE WASHER FOR THE SIDE STAND SPRING BOLT DOES NOT HAVE SUFFICIENT HARNESS AND COULD DEFORM, WHICH COULD CAUSE THE BOLT TO FLEX AND EVENTUALLY BREAK DURING…
ON CERTAIN SEDANS, A TEAR IN THE FABRIC OF THE DRIVER'S FRONT AIR BAG OCCURRED AFTER APPARENT CONTACT WITH THE INSIDE SURFACE OF THE AIR BAG COVER DURING DEPLOYMENT.
ON CERTAIN PASSENGER VEHICLES, SOME FRONT SEAT BELT ANCHORS MAY HAVE BEEN INSTALLED WITH AN INCORRECT WASHER, WHICH COULD RESTRICT ANCHOR MOVEMENT. AS A RESULT, THE SEAT BELT MAY BE…
ON CERTAIN MINIVANS, THE ANTI-LOCK BRAKE SYSTEM (ABS) USES A SENSOR ON EACH WHEEL TO DETECT WHEEL SPEED. SOME SENSORS ON THE REAR WHEELS WERE INSTALLED INCORRECTLY, WHICH MEANS THE…